Order now
-
High gloss, metallised emulsion, self-shining polish for vinyl, thermoplastic and sealed floors.
-
Contains high solids polymer for a long lasting deep slip resistant shine.
-
Two or three thin coats are recommended for best results.
-
White emulsion with acrylic odour.
How to Use
A high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings. industrial use only. Proshine is ready-to-use. Do not dilute with water. Do not shake container. Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal. Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply. Coverage is approximately 250 m² per 5L per coat. Allow final coat to dry completely before re-use. Do not buff floor at this stage. Periodically the floor gloss can be maintained by spray buffing with Protreat.
For professional and industrial use only.